Sway Bar BMR Suspension for Chevy Camaro 2012-2015

Product Overview

Reduce body roll and improve the handling of your 2012-2015 Camaro with a Rear Sway Bar Kit from BMR Suspension! Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR’s Adjustable Rear Sway Bar Kit (SB033) increases sway bar rate over the OE bars and is designed for street performance, autocross, and road racing applications. When performance is a must, rely on BMR Suspension!

• Fits 2012-2015 Chevy Camaros
• Manufactured from 32mm heavy-wall DOM tubing
• Designed for Camaros with FE4 rear suspension systems (2012-15 ZL1, 2013-15 SS)
• Greaseable 88-durometer polyurethane bushings
• Thrust washers allow for proper location of the sway bar and prevent lateral movement
• Cold-formed to better resist torsional fatigue
• 3-hole adjustable
• 25-200% increase in sway bar rate
• Dramatically reduces body roll
• Greater sway bar control allows for better handling of your vehicle
• Available in red or black hammertone powder coat for long lasting good looks
• 1-2 hour installation time
• Proudly designed in the USA!
• Proudly made in the USA!

Please note:
• BMR’s SB033 is not compatible with convertible Camaros or Camaros equipped with V6s.
• BMR’s SB033 is designed as a direct replacement for FE4 rear suspension systems where the sway bar end links are located outboard of the rear shocks. 2010-2012 Camaro SS’s may upgrade to this FE4 bar if the rear lower control arms and rear sway bar end links are upgraded to FE4 spec.

Below are rate specs compared to available OE bars:
• OE SS Bar (FE4)
o Hole 1 = 100% increase in sway bar rate
o Hole 2 = 150%
o Hole 3 = 200%
• OE ZL1 Bar (FE5)
o Hole 1 = 25% increase in sway bar rate
o Hole 2 = 40%
o Hole 3 = 75%

Compatibility

Chevy Camaro 2012-2015