Camaro/Firebird 1967-1969 Big Block Chevy Headers
When only the very best will do, ARH has the answer. Available in 1-7/8″, 2″ and 2-1/8″ primaries, our headers will outperform and outlast the competition, guaranteed. Expect a great fit, easy plug access and excellent ground clearance. Fits Nova models from 1968-1972.
Product features on this system includes:
- 100% Made in the USA – Never Outsourced
- Made entirely of 304 stainless steel
- 3/8″ thick laser-cut flanges for a warp-free seal
- Hand-ported TIG welded inlets
- Optimized primary tube routing for superior fit and performance
- Merge collectors with scavenger spikes
Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
| Weight | 65,799 lbs |
|---|---|
| Array | 1-7/8″ x 3″, 1-7/8″ x 3-1/2″, 2″ x 3-1/2″, 2″ x 4″, 2-1/8″ x 3-1/2″, 2-1/8″ x 4″ |
Related products
Cadillac CT5-V Blackwing Axle Back
American Racing Headers Axle Back for the CT5-V Blackwing features 3" stainless steel mandrel-bent tubing, our signature Pure Thunder Series mufflers, and dual split rear exit with 4" polished S/S quad tips. The American Racing Headers axle back system offers a deep tone and is designed to handle tremendous power. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Optimized primary tube routing for superior fit and performance Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Cadillac Escalade V Long System
Escalade V Owners now have an opportunity to take their performance to another level with ARH's 100% U.S. made 304 S/S long tube system. Designed to free up some serious HP by eliminating restrictive points in the factory exhaust system, ARH Escalade V systems will deliver the performance you'd expect, with the quality ARH is know for. This system comes with 1 7/8" primaries, 3" merge collectors, and connection pipes with G-Sport Cats, along with all the necessary hardware and gaskets for a bolt-on installation. These ARH long systems were designed to bolt-on to your factory exhaust system. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Catted systems feature 400 cell G-Sport catalytic converters for extreme durability Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Gen 2 Camaro Header Back System
Gen 2 Camaro (1970-1981) owners looking to increase performance, have great sound and that American-Made quality you can trust, look no further than the American Racing Headers! Featuring our mandrel bent stainless steel, an ARH Header-Back System will deliver the exhaust sound and power to match the aggressive look of your car. Available with 3" X-Pipe/Tubing, and our signature Pure Thunder Series Mufflers! Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
GMC CKRV Truck Series (1973-1991) Long System
ARH is proud to offer our long systems for the 1973-1991 GMC CKRV Truck Series. Featuring our American Made 304 stainless steel 1 3/4" or 1-5/8" primaries, 3" or 2-1/2" merge collectors, and connection pipes along with all the necessary hardware and gaskets for a bolt-on installation. The American Racing Headers 1973-1991 GMC CKRV Truck Series long systems were designed to connect to your factory or aftermarket exhaust system. Some modification may be required. This system fits: GMC Jimmy Suburban Chevy K5/K10 Blazer Chevy Trucks: R-Series Truck = 2 Wheel Drive (1987-1991) V-Series Truck = 4 Wheel Drive (1987-1991) C-Series Truck = 2 Wheel Drive (1973-1991) K-Series Truck = 4 Wheel Drive (1973-1991) Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Tri-Five Chevy Headers
New from American Racing Headers are our 1955-1957 Tri-Five Chevy Small Block Headers. Designed with durable .065 wall tubing and your choice of 1-3/4" or 17/8" primaries. Pair these headers with an ARH Tri-Five Header-Back Exhaust System by clicking here . We are proud to build these systems at American Racing Headers in our Research and Development facility with aerospace-grade T-304 stainless steel. Every piece of our products are made here with 100% USA sourced materials! Through this process we are able to offer lifetime warranty on all our systems against rust, corrosion and manufacturing defects. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized tube routing for superior fit and performance Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Reviews
There are no reviews yet.