Nissan Patrol 2002-2023 Catback
6.503,00 SAR
Looking to add remarkable sound and restriction-free exhaust flow to your Nissan Patrol? The American Racing Headers CatBack is just what you are looking for. Featuring 3″ 304 stainless steel construction and our exclusive Pure Thunder Series mufflers, an ARH CatBack will meet or exceed your expectations for performance under the most demanding environmental conditions. Catback will fit all 147″ Wheel-Base Patrols.
Product features on this system includes:
- 100% Made in the USA – Never Outsourced
- Made entirely of 304 stainless steel
- 3/8″ thick laser-cut flanges for a warp-free seal
- Optimized tube routing for superior fit and performance
Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
| Weight | 49,3 lbs |
|---|---|
| Array | 3″ x 3″ / With Cats |
Related products
C5 Corvette Long System 2004
With race inspired technology built into every system, you're looking at the very best the performance exhaust industry has to offer. Our C5 systems are available with 1-3/4", 1-7/8" or 2" primaries with catted or non catted X-pipe mid-section. 1-3/4" mid sections have a 2-1/2" reduction at the flange to connect to stock system. Of course, these are manufactured using the highest quality 304 S/S available and require no modifications to install. Install instructions click here Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Catted systems feature severe duty 300 cell catalytic converters with the option to upgrade to 400 cell G-Sport catalytic converters. Call before ordering to upgrade. Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Cadillac CT4-V Blackwing Down Pipes
CT4-V Blackwing owners, how does 28-30 additional rear wheel horsepower and NO CEL sound? Our new severe duty downpipes by ARH deliver just that and more! The incredible gains come with no additional changes other than the swap. Manufactured using heavy duty 5” G-Sport cats, this kit can handle whatever performance potential is your goal, most especially if tuning of any kind is planned. Our downpipes are a direct bolt-in with no modifications required. For more information, please feel free to reach us. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Catted systems feature 400 cell G-Sport severe duty catalytic converters for extreme durability Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Cadillac CT5-V Blackwing Catback
American Racing Headers Catback for the CT5-V Blackwing features 3" stainless steel mandrel-bent tubing, our signature Pure Thunder Series mufflers, and dual split rear exit with 4" polished S/S quad tips. The American Racing Headers catback system offers a deep tone and is designed to handle tremendous power. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Optimized primary tube routing for superior fit and performance Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Camaro/Firebird F-Body LS1 Race Headers
With a wide array of applications to fit your F-Body specific requirements and performance goals, ARH leads the way. From mild to wild, we have what you need in a high quality, 100% US made system. If you are looking for outstanding quality for your Gen 4 F-body, The buck stops at ARH. With a wide array of applications to fit your specific requirements and performance goals, ARH leads the way. From mild to wild, we have what you need in a high quality, 100% US made system. Race only headers have no air or EGR Fittings. Includes: gaskets, clamps, O2 Ext. Harness and Hardware. Notes: Our headers are designed to fit the stock K-Member, BMR K-Memeber or Aftermarket K-Members equivalent to BMR. Y-Pipes with up to 4" outlet also available Additional applications available. Call us to discuss what you need in detail. Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
GM G-Body Headers Back Exhaust System 78-88
American Racing Headers answers the call for performance and sound for your G-Body with our new ultra high quality stainless steel exhaust system. These systems come packed with top tier materials and craftsmanship that ARH is known for. These systems feature our Pure Thunder Series Mufflers with rear or side exit exhaust tips. ALL mounting brackets necessary for install are included. (Also available without mufflers.) The fitment on these exhaust systems are as follows: Direct bolt on to ARH G-Body Small Block Headers G-Body Header Back Systems are easily adaptable to other header brands or your stock manifolds. G-Body Big Block Header Back Systems only fit with G-Force K-Members. Call for more info. This system fits the follow Chevy G-Body vehicles: Buick Century (1978–1981), Buick Regal (1978–1981), El Camino (1 978–1987), Malibu (1978–1987), Monte Carlo ( 1978–1987), Pontiac Bonneville (1978–1986), Pontiac Grand Prix (1978–1986), Pontiac Grand LeMans (Canada 1982–1983), Pontiac LeMans (1978–1981), GMC Caballero (1978–1987) Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
GMC CKRV Truck Series (1973-1991) Long System
ARH is proud to offer our long systems for the 1973-1991 GMC CKRV Truck Series. Featuring our American Made 304 stainless steel 1 3/4" or 1-5/8" primaries, 3" or 2-1/2" merge collectors, and connection pipes along with all the necessary hardware and gaskets for a bolt-on installation. The American Racing Headers 1973-1991 GMC CKRV Truck Series long systems were designed to connect to your factory or aftermarket exhaust system. Some modification may be required. This system fits: GMC Jimmy Suburban Chevy K5/K10 Blazer Chevy Trucks: R-Series Truck = 2 Wheel Drive (1987-1991) V-Series Truck = 4 Wheel Drive (1987-1991) C-Series Truck = 2 Wheel Drive (1973-1991) K-Series Truck = 4 Wheel Drive (1973-1991) Product features on this system includes: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel 3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors with scavenger spikes Attn. All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads/highways and may be subject to fines and/or criminal liability as per the Clean Air Act.
Reviews
There are no reviews yet.